-
Pr-10 Absolute Fine Solids Compacted Cyclonic Removal
The PR-10 hydrocyclonic element is designed and patented construction and installation for removing those extremely fine solid particles, which density is heavier than the liquid, from any liquid or mixture with gas. For example, produced water, sea-water, etc.
-
PR-10， Absolute Fine Particles Compacted Cyclonic Remover
The PR-10 hydrocyclonic element is designed and patented construction and installation for removing those extremely fine solid particles, which density is heavier than the liquid, from any liquid or mixture with gas. For example, produced water, sea-water, etc. The flow enters from the top of vessel and then into the “candle”, which is consisted of varies number of discs in which the PR-10 cyclonic element are installed. The stream with solids are then flows into the PR-10 and the solid particles is separated from the stream. The separated clean liquid is rejected into the up vessel chamber and routed into the outlet nozzle, while the solid particles are dropped into the lower solids chamber for accumulating, located in the bottom for disposal in batch operation via the sand withdraw device ((SWDTM series).
-
Deoiling hydrocyclone
A hydrocyclone skid with a boost pump of progressive cavity type installed of a single liner is to be used for testing the practical produced water at specific field conditions. With that test deoilding hydrocyclone skid, it would be able to foresee the real result if the hydrocyclone liners to be used for the exact filed and operational conditions.
-
Debulky water & Deoiling hydrocyclones
A test skid with one debulky water hydrocyclone unit installed of two hydrocyclone liners and two deoiling hydrocyclone units of each installed of a single liner. The three hydrocyclone units are designed in series to be used for testing the practical well stream with high water content at specific field conditions. With that test debulky water and deoilding hydrocyclone skid, it would be able to foresee the real result of water removal and produced water quality, if the hydrocyclone liners to be used for the exact filed and operational conditions.
-
Desanding hydrocyclone
A desanding hydrocyclone skid installed of a single liner comes with accumulator vessel is to be used for testing the practical applications of well gas with condensate, produced water, well crude, etc at specific field conditions. It has all necessary manual valves and local instrumentation. With that test desanding hydrocyclone skid, it would be able to foresee the real result if the hydrocyclone liners (PR-50 or PR-25) to be used for the exact field and operational conditions, such as.
√ Produced water desanding – removal of sand and other solids particles.
√ Wellhead desanding – removal of sand and other solids particles, such as scales, corrosion products, ceramic particle injected during well cracking etc.
√ Gas wellhead or well stream desanding – removal of sand and other solids particles.
√ Condensate desanding.
√ Others solid particles and liquid separation.
